Feature

●The 4th generation of 100mm wide filter holder with a large modified specification, finally compatible with aluminum frames
●Maintenance tool (hex wrench), storage case included
●The inner slot size is 3.8 inches (97 mm) to 4.2 inches (107 mm) in previous models, and has been improved with a strong vignetting effect
●Product Name: HT100IV Holder with CPL with Frame Set (Model Number: K21071)
●External Dimensions (W x H x D): 5.5 x 4.8 x 0.8 inches (140 x 123 x 21 mm) (Frame: 0.2 inches (5.5 mm) *Excluding protruding part/Weight: Approx. 3.9 oz (86 g) (including adapter ring)
●HT100 IV Magnetic CPL Filter Adjustment Dial Included
●Shipping Holder Slots: 3 (2 slots can be changed with included parts)


Description

KANI HT100 IV Filter Holder + CPL Filter Frame Bundle

HT100IVHolder+CPL+FrameHT100IVHolder+CPL+Frame

Product Configuration

  • HT100IV Filter Holder Body
  • Filter frame 100x150mm / 100x100mm 1 each
  • Magnetic Adapter Ring HT100IV-S82-M95
  • Premium CPL0# HT100IV-M95
  • Step Up Ring 67-82mm/72-82mm/77-82mm Each
  • Maintenance tools (hex wrench), storage case

Overview

Includes 2 exclusive frames and a dedicated PL filter.Ready to use with your existing square filter

HT100IV Series 100mm Filter Holder System with Filter FrameThe aluminum frame is added to the outer circumference of the filter to prevent damage caused by drops, and greatly improve operability.Improved holder body is thin and has been improved to be more resistant to vignettingAs with previous models, the filter slot can be changed from 3 to 2 frames.The dedicated CPL filter uses a magnetic system from the front of the adapter for easier removal and removal.

The included adapter ring allows it to be attached directly to the lens with a filter diameter of 82mm.For 67mm/72mm/77mm lenses, use the included step-up ring.

The popular neoprene holder case continues to be used in the HT100 IV system.The texture of the fabric and the operation of the zipper is preserved.

A filter frame is required for use with conventional KANI 3.9 inches (100 mm) wide square filters.

How to Use KANI HT100 IV Filter Holder + CPL Set

HT4_100_1HT4_100_1

HT4_100_2HT4_100_2

HT4_100_3HT4_100_3

HT4_100_4HT4_100_4

1. Put the adapter ring on the lens

Attach the included adapter ring (HT100IV-S82-M95 ring) to the filter screw on the end of the lens.If the adapter ring is fixed to the outer frame of the holder (filter mount), the knob on the outer frame can be removed by pulling it towards the arrow on the outer frame.

The adapter ring can be attached directly to lenses with a filter diameter of 3.2 inches (82 mm).For lenses with filter diameters of 67mm/72mm/77mm, apply the included step-up ring to the adapter ring.

2. Attach the magnetic filter

If you use the included CPL filter, or other special magnet filter, please attach it from the front of the ring.

Adjust effects such as CPL are done by rotating the gear on the holder side.

3. Attach the outer frame of the holder (filter mount)

When the outer edge of the adapter ring is hooked onto the nail on the outer edge of the holder, the adapter ring is pushed into while adding a nice knob on the holder outer frame.

Spring integrates the adapter ring and the outer rim.The outer frame can be rotated freely after fixing.

4. Attach the square filter set on the dedicated frame

Insert the square filter into the slot of the frame object holder.Insert the filter into the same slot on the left and right so that the filter side is parallel to the lens surface.

Shipment can be used up to 3 pieces at the same time, but basically use them from the front (lens side) slot.

How to install the filter frame (each size)

HT4_Frame_100x150_1HT4_Frame_100x150_1

HT4_Frame_1HT4_Frame_1

HT4_Frame_2HT4_Frame_2

HT4_Frame_3HT4_Frame_3

Parts composition: frame body, fixing hardware, 2 mounting screws, mounting tools (hex wrench), storage case.

1. To the front side with the "KANI" logo on the frame body, take out the hex wrench, fixing hardware, and screws included in the product.

Please be careful of losing parts.

2. Insert your existing square filter into the groove in the lower center of the frame and tuck it into the frame.

3. Insert the fixing hardware to match the shape of the frame side and use the hex wrench to screw it.

HT100 IV Filter Holder Set Filter Frame Bundle Square Filter Holder Square Holder nd Filter Holder 77mm 72mm 67mm 100mm System HT100 IV Filter Holder + CPL Set with Magnetic Adapter Ring Square Filter, Square Filter, Filter Holder, nd Filter Holder, Magnetic Cpl HT100 IV Filter Holder Set, Filter Frame, Sold Separately, Square Shape, Square Filter, Filter Holder, Square Holder, Filter Set HT100 IV Filter Holder + CPL Set Square Square Square Filter Filter Holder Square Holder ND Filter Holder Magnetic Cpl Magnetic Cpl Filter Frame Aluminum Frame 100mm Square Square Filter Square Filter Holder Square Holder Metal Frame Metal Frame Reinforced Frame Aluminum Frame Filter Frame Aluminum Frame 100mm Square Square Filter Square Filter Holder Square Holder Metal Frame Metal Frame Reinforced Frame Aluminum Frame
HT100IV Frame Bundle HT100IV+CPL Frame Bundle HT100IV Frame Sold Separately HT100IV+CPL frame sold separately Filter Frame 100x150 Filter Frame 100x100
Customer Reviews
—
4.0 out of 5 stars
2
—
—
3.0 out of 5 stars
1
3.5 out of 5 stars
2
Price ¥23,800 ¥37,800 ¥16,800 ¥29,800 ¥4,840 ¥4,290
HT100IV holder main unit ○ ○ ○ ○ - -
Adapter Ring ○ - ○ - - -
Magnetic Adapter Ring - ○ - ○ - -
Magnetic CPL - ○ - ○ - -
Frame: 100x150 ○ ○ - - ○ -
Frame: 100x100 ○ ○ - - - ○
Step Up Ring Set ○ ○ ○ ○ - -
Other Essentials No No Filter Frame Filter Frame HT100 IV Set Assorted HT100 IV Set Assorted