[5pcs]

[10pcs]

[One]

Features:
The aron alpha allows for fast and strong adhesion.
The illumination of the included light reduces the cure time.
The illumination of the included light prevents chalking.
The light is irradiated to accelerate the cure time, so it can be glued on and filled glue.
The blue light is the most effective way to shorten the curing time of aron alhua light.
Better on the eyes than UV light.
Battery replaceable.
Precautions for Use:
Do not look at the light directly, or look at others.
When the light is irradiated, please keep it away from your eyes from the eyes and avoid using it for a long time.
When using it, it is well ventilated.
The lining of the leather, fabric, tissue, etc., may cause burns.
If applied in a large amount of light and irradiation may cause white smoke and heat to generate, so please be careful of burns and apply a small amount of glue at a time.
Immediately after light irradiation, the hardened part may get hot, so please do not touch it immediately.
Do not expose to fire. Do not use in open flames.
The adhesive and surrounding areas may white.
It is not removable, so it will not stick to clothing.
Keep out of reach of children and avoid pranking.
Do not use for adhesion or for any application other than the recommended purpose.
Store in a location with low moisture away from direct sunlight.
When you slow, discard according to the chosen garbage disposal.
Adhesive seals the container.

From the Manufacturer

How to open

1. When first use, hold the black nozzle at the base and seal it up until the very end.	2. Hold the base of the black nozzle and pinch the cap with your opposite hand and pull it straight.

Adhesive Instructions

1. Clean the adhesive surface and dry it well.	2. Drop a small amount on one side.	3. Clean the nozzle well and snap the cap closed even in the middle of work.

4. Press it together for a while.	5. Illuminate the light towards the overflow adhesive for about 10 seconds.The light and glue should be about 5cm apart.