Case Assembly Instruction 1

The case consists of 3 pieces: a base, a side plate, and a top plate.

Case Assembly Instruction 2

Insert the side plate into the base.Please be careful on the front and back of the pedestal.Insert the side plate into the groove side.

Case Assembly Instructions 3

Place the side plate between the back of the top plate and the front side of the tip.The color is not as shown in the pictures.

No need to worry about storage space.

When not in use, it can be folded and stored as shown in the picture.It can be assembled when you need it and folded for storage when not in use.When folded, the thickness is about 1.2 inches (3 cm).When delivered, it will be folded as shown in the picture.

Inner dimensions are approximately 0.4 inch (1 cm) shorter

Since the side plates are inserted into the groove of the base, the height of the actual inner dimensions will be reduced by about 0.4 inches (1 cm).The listed dimensions are outside dimensions of the side plates (PVC sheet).The base and top board will overlap if the same size, but the sheet thickness is 0.01 to 0.02 inches (0.35 to 0.5 mm), so it is recommended that you do not have too heavy items.There are no calculations on weight resistance.

Side panels are delicate material.

Corners are processed to foldSide panels are very thin material.Material is made from PVC sheet made by Sekisui Chemical Industries.

Pleass: Thickness of transparent side plates; ↓

Square Case 12cm to 24cm Series 0.35mm

Square Case 10.6 inches (27 cm) to 15.7 inches (40 cm) Series 0.1

Horizontal Case 9.1 to 15.7 inches (23 to 40 cm) Series 0.1 inches (0.4

Square Case Horizontal Case 19.7 inches (50 cm) Series 0.2 inches (0.5 mm)