Feature

●All-analog 3-channel base amplifier simulator pedal with vacuum tubing
●3 channels (Clean | Dirt | Drive) feature 2 band EQ on Channel 1 and 3 shared 3-band EQ. In addition, the Channel 3 can be blended dry and wet
●Features an Ampeg SVT-810E Base Cabinet Inspired Analog Cabinet Simulation Now you can decrease one of the headaches called Micing
●This is a domestic import product. Comes with a 1 year warranty against the date of purchase. You will be supported by an authorized reseller even after the free warranty period
●This product is an imported product, so there may be cases of crushed boxes, but this is not a problem. No returns or exchanges due to crashed boxes


Description

ReVolt Bass is an all-analog 3-channel amplifier simulator.
As the latest model of the Amplifier Simulator, the sound fundamentals are solidated with the ultimate tone, and plays an important role as the center of the equipment.
The basic tone inspired by the iconic three amplifiers, the power of 200V real vacuum tubing, and the massive play style and the OD boost circuit, it is sure to be a beating.

3 Channels (Clean, Dirt, Drive)

• Channel 1: Classic Clean is a powerful sound with full frequency response and power based on the legendary Ampeg® SVT 76, a symbol of bass sound.
  The tone has a powerful low range | punchy midrange | smooth high range.
• Channel 2: Vintage Dart is based on Marshall® 1992 JMP Super Bass Mark II.
  When you need a sound that is going to the next level, this bass sound has a vintage rough.
• Channel 3: Modern Drive is a flexible Two Notes original sound.
  Tight, rich gain.
  It is able to blend dry and wet to create a variety of tones, such as mixing clarity as needed.

Dont compromise on tone

The advantage of the DI box is that it is convenient and reliable, and the ability to control the details with pure tones.
The difficulty is that there is no warmness like a vacuum tube amplifier.

The ReVolt is equipped with a 12AX7 preamp tube that runs at 200V and is made with real vacuum tubing for rich tones.
The benefits of the DI box remain intact with the warmth of a vacuum tube, a sense of bite, and a good response.

Superb Performance

You need the right equipment for performance.
The Boost Circuit is powered for every occasion.
Simply determine the boost volume, select the channel, and step on the foot switch, you will be the first to dive into a world of transparency and abundance.

Excellent EQ

The perfect EQ is important for guitar tones that are true to the original.
This unit features a 2-band EQ on Channel 1 and a shared 3-band EQ for Channel 2 & 3.
Everything you need from EQ is included and plays a harmonious sound.

Flexible connection

This unit supports a variety of connections. Start with a simple and amazing sound directly.
Plus, turn on the 4-Cable Method to add 3 channels to your amplifier head.

No microking needed.

Features an analog cabinet simulation inspired by Marshall® Slash Signature 4x12.
Now you can decrease one of the headaches called Micing. Turn the CAB SIM switch in IN, connect it to the mixer |PA|FRFR cabinet to support any recording or playing.

DynIR Cabinet & Effects Included

This unit comes with a Torpedo Wall of Sound lifetime license and 10 DynIR cabinets.
A wide range of effects is included so you can mix track recorded on Revolt.

Included Cabinet List (for Wall of Sound)

• WGrandBlvd Ampeg® 1x15
• Fridge 9 Ampeg® 9 x 10
• Heaven Top David Eden® 4x10
• AZBen SWR® 1x18
• AluXL Hartke® 4x10
• Marco Markbass® 2x10
• CalifLow MESA/Boogie® 2x10
• Dual BW15 Peavey® 2x15
• 2NotesCSB Custom 1x15
• Voice V125 Vox® 1x12

Wall of Sound

In virtual cabinet, you can pick from 8 microphones (dynamic|condenser | ribbon) to microphone.

• DynIR has a phase arrangement, so there is no phase issue.
  
• You can use 2 microphones to blend at the same time.
  
• Access to over 400 virtual cabinets.
  

Mic Position

• Stepless installation away from near-distance microking
• You can place it anywhere from the center of the cone to the edge.
• Front and back cabinet options

Effect (Wall of Sound)

• Power Amplifier Emulator
• 4 Vacuum Tubes: EL84|EL34|6L6|KT88
• Two Circuit Types: Class A Single End | Class A/B Push Pull
• 2 Modes: Pentode | Triode
• Settings: Volume | Contour | Depth
  

5 Band Equalizer

• Creates Virtual Cabinet Tone
• -Includes 5 semi parametric bands that can be customized at 20dB to +20dB and low cut filters
  

Exciter

• Set dynamics and frequencies to enhance tone
• Highlights low and high
  

Reverb

• 8 Rooms (Studio A & B|Loft|Cathedral|Basement|Hall A & B|Crypt)
  

Compressor

• Based on high-end stadium compressors
  

Specifications:

• Input: Terminal: 0.2 inch (6.35 mm) (¼ inch) Unbalanced (TS), Impedance: 1 MΩ
• End Terminal: 0.2 inch (6.35 mm) (¼ inch) Unbalanced (TS), Maximum Output Level: +11 dBu, Impedance: 300 Ω
• Return Terminal: 0.2 inch (6.35 mm) (¼ inch) Unbalanced (TS), Maximum Input Level: +11 dBu, Impedance: 1 MΩ, Unbuffered, Direct Connection to Output when Activated
• Output terminal: 0.2 inches (6.35 mm) (¼ inches), unbalanced (TS), maximum output level: +11 dBu, impedance: 300 Ω
• DI output: XLR, balance, impedance: 600Ω (balanced), 300Ω (unbalanced), maximum output level: +11dBu, supports 48V phantom power supply.
• Headphone: Terminal: 3.5 mm (⅛ inch) Stereo (TRS), Impedance: 39 Ω
• AUX IN: Terminal: 0.1 inch (3.5 mm) stereo (TRS), Impedance: 10 kΩ
• Vacuum tube: PSVANE ECC83
• Boost Circuit:+0dB~+20dB,1.1kHz center
• Power adapter: DC terminal 0.08 inch (2.1 mm), center and negative
• Input Voltage: 12V DC
• Power consumption: Approx. 6 W
• Current Consumption: 600mA
  
• Dimensions: 7.6 x 4.6 x 2.8 inches (192 x 117 x 70 mm) (including terminals and knobs).
• Weight: 830g