Feature

●4.3" IPS LCD Touchscreen: The NanoVNA F V2 vector network analyzer adopts a 4.3" IPS LCD display with an ultra-wide viewing angle, no harm to your eyes even after long time use. Full touch screen design, three side buttons at the same time, flexible and convenient operation
●50KHZ‑3000MHZ: The network analyzer is expanded to 50KHz‑3000MHz, which increases the dynamic range up to 80db. Can be used to debug the duplex more accurately. It can measure S parameters, voltage constant wave ratio SWR, phase, group delay, smith charts and more
●5000mAh Lithium Ion Battery: The antenna analyzer has a built-in 5000mAh lithium ion battery, which can stand by up to 7 hours. Adopts high current 2A charging IC to reduce charging time and extend the 5V 1A USB output interface. Support Chinese and English interface, adjust the brightness of the screen and support the top computer
●METAL SHIELD: Touch screen antenna analyzer is robust and durable. The RF front end is designed with metal shielding and the S21 dynamic range is over 80dB in full frequency range. The RF interface is SMA and is convenient for connecting various test components
●Frequency Meter Function: The network analyzer has a frequency meter function, which can effectively measure cable length and group time delay. Most importantly, you can debug the UV band frequency duplexer. Effective shielding electromagnetic interference to ensure measurement accuracy


Description

Vector Network AnalyzerVector Network Analyzer

The design of this vector network analyzer is based on edy55 NanoVNA and OwOcomm S-A-A V2 and the previous generation of NanoVNA-F to thoroughly optimize the software.The operation interface is compatible with NanoVNA-F and the measurement range is extended to 3GHz, which makes the measurement more dynamic range, more precise and operatable.

Vector Network AnalyzerVector Network Analyzer

Vector Network AnalyzerVector Network Analyzer

Vector Network AnalyzerVector Network Analyzer

Vector Network AnalyzerVector Network Analyzer

The NanoVNA-F V2 has a high dynamic range and can be used to test UV band duplexers:

Measuring 915MHz Antenna:

868MHz Antenna Measurements:

2.4G Micro Strip Filter Measurements:

Vector Network AnalyzerVector Network Analyzer

NanoVNA F V2

Vector Network AnalyzerVector Network Analyzer
Package List

1 x Vector Network Analyzer

2 x SMA JJ RG405 Connecting Cable

6 x SMA Adapters

1 x Stylus Pen

1 x Type C Cable

1 x instruction book

1 x Storage Box

Vector Network Analyzer

Material: Aluminum Alloy, LCD

Screen 4.3" IPS TFT 800x480

Measuring frequency range: 50 KHz - 3,000 MHz

RF Output: -9 dBm (Errors within 1 GHz: Positive or minus 1 db)

Frequency Accuracy < 0.5ppm

S21 Dynamic Range 70dB(1.5GHz), 60dB(3GHz)

S11 Dynamic Range 50dB(1.5GHz), 40dB(3GHz)

2 Port Return Loss: 20dB Type (1.5GHz), 13dB Min(3GHz)

Number of calibration points: 101

Number of Scan Points: 101

  • Battery Type: 5000mAh Li-ion battery (built-in)
  • Scan Time: Approx. 1.9s/times (50 kHz-3000 MHz full frequency band)
  • USB Interface: USB Type C Communication Mode: CDC (serial)
  • Display Tracking: 4 traces