[300L]
Pressure tank container must be equipped with a water pump to work properly. This link does not include water pump
Product Name: Automatic Stainless Steel Pressure Container
Product Material: Food Grade Stainless Steel
Product Capacity: 100L/200L/300L/500L; Actual water storage capacity of the pressure tank is about 40%-70% capacity
Wide range of uses: well water pump, industrial washing, tap water boost, garden watering, pure water filling, washing machine supply, solar water heater
Product accessories: Pressure controller, multi-function check valve, pressure gauge, steel wire hose, stainless steel triple-way valve, safety valve, negative pressure valve, 3 x material belt, faucet switch, water inlet connector, water outlet connector
Operating principle
1. The inside of the pressure tank has an even atmosphere, and the pressure switch and pressure gauge are attached to the sealing container.
2. The water pump will start and the water level in the pressure tank rises, and the air in the pressure tank will be compressed to produce air pressure. When the air pressure reaches the set pressure (such as 0.28 mpa), the water pump will stop.
3. Due to the effect of pressure, the water in the pressure tank will flow out at high speed from the high pressure tank, after the water level decreases, the pressure will decrease and reach the set pressure (eg. 0.14 mpa).
4. Water pump starts automatically and the water source is automatically circulated, it is actually a small household water system
Note:
The open pressure of the safety valve is 0.3 MPa, and automatically opens and closes when the high pressure is applied, and the negative pressure valve effectively prevents the valve.
Due to installation issues, the pump cannot be installed in a high location and if external pressure is lower than internal force, the intake will automatically open by negative pressure.