[Single Item]
SansAmp BASS DRIVER DI is a base-specific direct box with vintage tubular tone, bright modern slap sound, aggressive distortion, all of which can be reproduced. Simply connect this unit directly to the mixer & recorder to get a tube amplifier sound.
Added switch to adjust bass frequencies to cover low sound range such as 5 strings and 6 string bases. We also added a switch to adjust the midrange control and its frequency.
The recording can also be connected directly to the mixer so you can output the sound you want from the main system, and of course you can connect it directly to your stereo or headphone. This device can also be used to connect directly to the stereo. You can also connect the headphones directly to the output to monitor it.
This product does not include an AC adapter. Please purchase separately
Regarding the "California Proposition 65 Warning" written on this product packaging California Proposition 65 is a safe drinking water and hazardous material construction process intended to protect the source of drinking water from the California to cause cancer or birth defects or other reproductive harm. This product is not harmful for use as intended purpose, it can be ignored or "without significant risk", but it is a warning to comply with the right to know in California. Warning does not imply this product is in violation of product safety standards/requirements. The California Government says "Proposition 65 warning does not mean that a product is not safe." The Consumer Administration has also been responded to the consumers agency that no warning is required for use and sales in Japan. Use with confidence
BASS DRIVER DI, a staple item of basists, has sold over 550,000 BDDI in the 22 years and has been supported by BDDI.In addition, the BASS DRIVER DI-LB model was released in 2015 in the plan of all access Inc. and purchased by base players in Japan.
TECH21 adopts the specifications of this Japan exclusive model, adding the BASS SHIFT 40/80Hz and MID SHIFT switch to complete the BDDI Version II.These changes allow us to provide powerful bass sound for even wider genres.
|
|
|
---|---|---|
As an effector.It can be used as a base effector to create a thick sound. As an amplifier or simulator for line recording, you dont spend time on amplifier micing, just connect this unit directly to the mixer & recorder to get a tube amplifier sound. |
Directly to PA SystemLike recording, it can be directly connected to the mixer so you can output your convincing sound from the main system. Can be directly connected to stereo or headphones. This device can also be used to connect directly to the stereo.No matter where and time you practice.You can also connect the headphones directly to the output to monitor it. |
TREBLE / MID / BASSBoost, cuttable active tone control with ±12dB control Flat position at 12 oclock We have added switches that can shift frequencies to both MID and BASS controls.BASS can be set up to choose a powerful dry feeling to cover the low end of the multi-stringed base and playback at 40Hz or less.The operation of this equalizer also affects the output level, so please control the level control to adjust the output level. |
|
|
|
|
---|---|---|---|
PRESENCEIncreases high range harmonics and attacks. Set low for smooth high frequency or clean sound without distortion. |
DRIVEAdjust the amount of overdrive The power section of the tube amplifier resembles a distorted character. |
BLENDYou can blend (mix) the direct sound of your instrument and the sound of your Sons Amplifier. Often set to MAX (100% Sands Amplifier Sound). However, if you connect a very natural sound or instrument with piezo pickup, adjust the blend control to create the desired sound. Even if this blend control is set to MIN, LEVEL and EQ are working. |
LEVELDetermine output level. |
|
|
|
|
---|---|---|---|
|
OUT -10dB 1/4"Switch output impedance of OUTPUT |
-20dB XLRSwitch XLR output impedance |
PHANTOM & GROUND CONNECTThis is a switch that connects or lifts the ground.The ground is connected with the switch turned on, and you can use the phantom power to supply power. |
|
|
|
|
---|---|---|---|
SHIFT 500/1000Hz (Mid Shift)Switch between MID frequencies between 500Hz and 1000Hz.500Hz when switch is up |
SHIFT 40/80Hz (Base Shift)Switch between bass frequencies between 40Hz and 80Hz.40 Hz when the switch is up and supports low frequencies with multi-string bases. |
PARALLEL OUTPUTOutput connected directly from the input jack.Used to connect amplifiers, tuners, and signal processors |
XLR OUTPUTBalance output.The XLR LINE / INST switch allows you to switch the XLR output impedance. |