Feature
●Specifications: Model number: 80-2 Capacity: 12*20 ML. Maximum spin speed: 4000 R/min, Power: 110V External Size: 11.0 x 12.2 x 10.2 inches (28 x 31 x 26 cm); Maximum Centrifugal Force: 2325 x G; Weight: 17.2 lbs (7.2 kg); Timer Range: 1-60 MIN
●【Product Appearance】Using the transparent cover, you can observe the internal situation and reduce noise. The centrifugal separator has two swivel buttons for easy operation. Large capacity, small size, light weight
●Wide Range of Applications: Useful for separating blood and serum, qualitative analysis of urea production, separation of milk fat, and sudden sediment of samples. Suitable for 10 ml, 15 ml round bottom plastic hypersidate pipes or 5 ml, 7 ml, 10 ml vacuum blood collection
●Operation Instructions: Place the centrifugal separator on a flat and durable workbench. Connects to Power Supply Place a test tube of almost the same weight. Test tubes must be arranged symmetrically. Close the cover and set the spin time and speed. The speed and time knob must be placed at the lowest position before shutdown
●Note: Centrifugal equipment can be used for a long time, and wear is normal. After 300 hours of use, please replace the carbon brush immediately and avoid wear of the top of the product. If you have any doubts about the item you want to buy, please contact us
Description
NVCAYLI Centrifugal Separator Lab Centrifugal Separator Capacity 12 x 20ml 0-4000rpm Timer 0-60min 2325 x g Small Centrifugal Separator Low Speed Centrifugal Separator Desktop Centrifugal Separator Serum Separation / Blood Analysis / Sample Seperation / Centrifugal Test
NVCAYLI Centrifugal Separator Lab Centrifugal Separator Capacity 12 x 20ml 0-4000rpm Timer 0-60min 2325 x g Small Centrifugal Separator Low Speed Centrifugal Separator Desktop Centrifugal Separator Serum Separation / Blood Analysis / Sample Seperation / Centrifugal Test
EASY TO OPERATE: Timing Control, Rotate Button, Clear Value, Beautiful Appearance.Product advantages: small lightweight large capacity.Product Usage: Suitable for hospital laboratories, blood vapors, urea and biochemical laboratory for qualitative analysis of vaccine manufacturing.
Note: 1. The test tube in the centrifugal separator is arranged symmetrically, placing the test tube asymmetrically or placing the centrifugal separator on an uneven table, it will shake when the machine is centrifugalDuring operation, the weight and length of the symmetrical glass test tube (including chemical test liquid) must be equal and the deviation is large, the sway occurs.
2. After completion, adjust the speed adjustment knob to the smallest position, zero timer, turn off the power switch, wipe the inner cavity and rotor and close the centrifugal cover.
3. No-load operation without test tube is prohibited.
4.Do not open the centrifugal separator cover or touch the rotors while working
|
|
|
|
|---|---|---|
|
The cover is transparent and allows you to easily observe the state of centrifugal separation. The cover also reduces noise during operation and prevents dust from falling into the test tube. |
There are 4 anti-slip mats on the bottom of the centrifugal separator to increase stability when driving. |
Test Tube Requirements:Centrifugal sleeve length 10cm, inner diameter 1.8cm, outer diameter 2.3cmApplicable test tube: 10ml, 15ml round bottom plastic centrifugal separation tubes or 5ml, 7ml, 10ml vessels.Or applicable test tube: conical plastic centrifugal tubes with a capacity of less than 15ml and vacuum vessel with a capacity of less than 10ml. |
