[MP-1]
[MP-2]
Lithium ion battery with a large capacity of 24,000 mAh.
Can be used immediately for sudden battery charges.
Engine start aid (jump start) can be used when batteries are loaded with motorcycles and cars, or DC24V batteries on trucks, buses, and agricultural machines.
Comes with a USB (DC5V) 2A output terminal, so you can charge your smartphone, etc. (Power supply only)
Equipped with an LED light (white/amber) (light up, quick flash, SOS flashing).
Compact and lightweight type. Easy to use.
Do not use this product to start engines other than motorcycles or cars equipped with a 12 V battery or 24 V battery (jump start) on trucks, buses, farms, and building machines.
● Hybrid car engine start aid (jump start) please check whether the jump starter can be used by dealer or car manufacturer before use.
For motorcycles, depending on the position of the battery and the shape of the battery terminal, the battery connection clip cannot be caught in, so it may not be used
This product has a built-in lithium-ion battery, so if handled incorrectly, it may cause electric shocks, injuries, burns, heating, bursting, fire, explosion, fire, vehicle damage, or device damage.
Please read the instruction manual carefully before use
|
|
|
---|---|---|
Sudden BatteryEngine start aid (jump start) is possible when batteries are on motorcycles, cars, and trucks with a 12 V battery. |
Comes with a dedicated case.Can be stored and carried in a dedicated case.Instructions are also included. |
Not only when the battery is running out.You can also use it as an LED light for charging your smartphone or working at night. |
|
|
|
---|---|---|
STEP1Turn the engine switch off. Please turn all power switches off for electronics, interior rambs, etc.Please securely close the door or trunk.Please make sure the built-in putterry is fully charged (check 3 or more indicator lights on before using). |
STEP2Turn the switch to OFF. |
STEP3Connect the battery connection clip (red) + to the + terminal of the car putterry, and the battery connection clip (black) to the terminal.Connections are done + → -. Before proceeding to next, recheck whether the connection is wrong or not easy to move. |
|
|
|
---|---|---|
STEP4Voltage switching: Switch the switch to match the voltage of the car battery.After switching, press and hold the cell-boost button for about 2 seconds to activate the jiyamp starter display lamp (12 V or 24 V). |
STEP5Make sure the D putt terry connection clip is securely connected, then turn the vehicles engine switch to start position (start within 2 seconds). If you use it repeatedly, please rest for more than 30 seconds.If the main unit or cable is hot, be sure to cool it before using. |
STEP6Remove the battery connection clip (black) from the terminal of the car battery and the battery connection clip (red) +. |
|
|
|
|
---|---|---|---|
STEP1Make sure the power switch on this product and the power button / remaining level display is turned off, and connect the charging plug of the AC 100V charging adapter to the charging input jack of this product. |
STEP2Plug the AC 100V charging adapter into a household outlet. |
STEP3-4When charging is started, the blue light of the remaining level indicator light flashes. The flashing position changes depending on the charging status. |
STEP5When charging is complete, unplug the AC 100V charging adapter from your home outlet.Then unplug the charging plug of the AC 100V charging adapter from the charging input jack of this product. It will be fully charged in about 14 hours.Do not overcharge (over 15 hours). |
|
|
|
|
---|---|---|---|
STEP1Start your car engine. |
STEP2-3Make sure the power switch and power button / remaining level display button is turned off, and connect the charging plug of the DC 12/24V charging adapter to the charging input jack of this product. Connect the power plug of the DC 12V/24V charging adapter to the accessory socket. |
STEP4-5When charging is started, the blue light of the remaining level indicator light flashes. The remaining level indicator light blinks all and turns off after charging is completed. The flashing position changes depending on the charging status. |
STEP6Pull the power plug of the DC 12V/24V charging adapter from the accessory socket.Then unplug the charging plug of the DC 12V/24V charging adapter from the charging input jack. |
Lithium ion battery with a large capacity of 24,000 mAh.
Can be used immediately for sudden battery charges.
Engine start aid (jump start) can be used when batteries are loaded with motorcycles and cars, or DC24V batteries on trucks, buses, and agricultural machines.
Comes with a USB (DC5V) 2A output terminal, so you can charge your smartphone, etc. (Power supply only)
Equipped with an LED light (white/amber) (light up, quick flash, SOS flashing).
Compact and lightweight type. Easy to use.
Do not use this product to start engines other than motorcycles or cars equipped with a 12 V battery or 24 V battery (jump start) on trucks, buses, farms, and building machines.
● Hybrid car engine start aid (jump start) please check whether the jump starter can be used by dealer or car manufacturer before use.
For motorcycles, depending on the position of the battery and the shape of the battery terminal, the battery connection clip cannot be caught in, so it may not be used
This product has a built-in lithium-ion battery, so if handled incorrectly, it may cause electric shocks, injuries, burns, heating, bursting, fire, explosion, fire, vehicle damage, or device damage.
Please read the instruction manual carefully before use