Accidental battery trouble (rise)

JAF statistics are the number 1 annual battery trouble.

A must have item for "if any".

Even if you dont have a car to help you, you can still use it.

Comes with backflow protection for jump start

Please read the instruction manual of your car before use.

You can also charge your smartphone.

Comes with a USB port, so it can be used as a mobile battery for your smartphone.

Capacity: 7,500 mAh

For night or dark lighting

The white LED light can light up to about 24 hours.

Switchable.Turn on → Fast Flashing → SOS Flashing → Off

Please do not look directly at the LED light.

Lightweight and compact

Lightweight with a lithium ion battery.

Small as a smartphone, so it can be stored compactly.

Can be charged from household electrical outlets or interior accessory sockets.

Jump start procedure

1. Turn the engine off.

2. Attach the jump starter cable battery clip (red +) to the + terminal of the car battery. -Battery clip (black-) to the terminal.Installation is done by positive and negative order.

3. Connect the plug of the jump starter cable to the jump starter cable jack on the main body.

4.Make sure the plug and battery clip is properly connected before starting the engine.Rotate the vehicles engine switch to the starting position.Within 2 seconds.

5. When the engine starts, immediately unplug the jump starter cable from the main unit.

6. Remove the car battery from the battery clip, black and red.

USB powered

Plug the USB input terminal A terminal of charging devices (smartphones, etc.) into the USB output terminal of the main unit.

LED Light

1. Press the power button once and hold the power button for more than 2 seconds while the LED light turns on.

2. Press and hold the power button for more than 2 seconds to turn off the LED light.

Charges via household outlets

1. Make sure the power is off and connect the charging plug of the AC 100V charging adapter to the charging input jack of this product.

2. Plug AC 100V charging adapter into household outlet.

3. When charging is started, the blue light of the remaining power/charging level indicator will flash.

4. 5 lamps in the remaining charge/charge level display lamps are fully charged.

5. When charging is completed, unplug the charging adapter from the outlet.

Charged by in-car charging (DC 12 V vehicles).

1. Start the car engine.

2. Make sure the power is off and connect the charging plug of the DC 12V charging adapter to the charging input jack of this product.

3. Connect the DC 12V charging adapter to the accessory socket.

4. When charging is started, the blue light of the remaining power/charging level indicator will flash.

5. 5 lamps in the remaining charge/charge level display lamps are fully charged.

6. Remove the DC 12V charging adapter from the accessory socket, and remove the charging plug of the DC 12V charging adapter from the charging input jack of this product.